| 通常技术性因素 | Specification | C6^36 | C6^40 | C6^50 | ||
| 床腰上最主要倾动直径约 | Max.swing over bed | 360 | 400 | 500 | ||
| >加 | 刀墙上明显倾动截面积 | Max.swing over cross slide | 190 | 230 | 330 | |
| 刀鞍处极限旋转外径 | Max.swing over gap | 520 | 560 | 660 | ||
| 3力 | 主距 | Center distance | 750、1000、1500mm | |||
| 床身高宽比 | Bed width | 360mm | ||||
| 设备的主轴外径 | Spindle hole | cp52mm | ||||
| C/1 Z主 | CNC主轴两端长宽比 | Spindle nose | C6 | |||
| U轴 | 主轴轴承锥孔 | Spindle taper | MT6 | |||
| m | 刀盘时速依据（级数) | Spindle speed(Nember) | 40-1400rpm(9 Steps)特异定货 1600rpm | |||
| -n | 公制英制螺纹空间（种数） | Metric threads range(Kinds) | 0.25-14mm(19Kinds) | |||
| m进 3给 | 英制螺牙时间范围（种数） | Inch threads range (Kinds) | 2-40/inch | |||
| C/1 | 法向齿螺母区域（种数） | Module threads range (Kinds) | 0.5-3.5nx(ll Kinds) | |||
| n 75 sS | 横长板滑板旅行路线 | Cross slide travel | 180mm 222mm | |||
| 2 1 | 钢刀架往返 | Compound rest travel | 85mm | |||
| 3> T/X O m | 车刀杆截面积长宽高 | Cross-section size of tool shank | 20x20mm2 | |||
| $ | 尾座套筒锥度 | Taper of tailstock sleeve | MT4 | |||
| S尾 | 尾座套筒网套直径 | Dia of tailstock sleeve | 65mm | |||
| 3座 | 尾座套筒日程 | Travel of tailstock sleeve | 140mm | |||
| n 7n | 主三相电机 | Main motor power | 4KW 5.5KW 5.5KW | |||
| 进行包装箱长度:(长x宽X高） | PACKING SIZE(LxWxH) | |||||
| 管理中心fi巨：Center distance | 750mm | 2220x1150x1590mm | ||||
| 1000mm | 2470x1150x1590mm | |||||
| 2500mm | 2970x1150x1590mm | |||||
| 单重：/ | 争重/毛重（斤） | Net Weight/Gross Weight(kg) | ||||
| 心中fi巨：Center distance | 750mm | 1350/2000 | 1400/2050 | 1500/2150 | ||
| 1000mm | 1450/2100 | 1500/2150 | 1600/2250 | |||
| 1500mm | 1600/2250 | 1650/2300 | 1750/2400 | |||
